PLW4*9 Izikhonkwane zamatayara e-ice screw carbide zebhayisekile

Inkcazelo emfutshane:

Inokuthi ifakwe ngokuthe ngqo kumphezulu wevili lebhayisikili ukubonelela ngolawulo olungcono kunye nokuzinza kwimozulu ebandayo okanye indawo enzima.


Iinkcukacha zeMveliso

Ividiyo yeMveliso

Iithegi zeMveliso

Intshayelelo yeMveliso

Igama Izikhonkwane zamatayara eCarbide Iintlobo PLW4*9
Isicelo Iibhayisekile,iiScooters Iphakheji Ingxowa yeplastiki/ibhokisi yephepha
Izinto eziphathekayo Iphini yeCarbide okanye i-cermet pin + umzimba wentsimbi ye-carbide
Umzimba we-studs Izinto eziphathekayo: Intsimbi yekhabhoni
Unyango lomphezulu : I-Zincification

Iimbonakalo

① I-98% iphucula ukuxhathisa ukutyibilika
② uhambo olukhuselekileyo noluthembekileyo
③ isikhonkwane sekhabhide esomeleleyo
④ kulula ukuyifaka
⑤ ukuthengisa okushushu eYurophu naseMelika

IiParameters zeMveliso

imveliso-2
imveliso

Ukuhlohla

ipharamitha

FAQ

Ngaba izikhonkwane ziya kugqobhoza amatayara ?

Khetha ubungakanani obufanelekileyo kwaye uyifake ngendlela eyiyo, ayizukugqobhoza amatayara.Ngenxa yokuba ubunzulu bofakelo buhlala bufana nobude bepateni yerabha yokunyathela .Unako kwakhona ukuqhawula kwitayara xa ungayisebenzisi.

Ingaba inefuthe kubomi bamathaya?

Izikhonkwane zamaTire sele ziluhlobo lweemveliso ezivuthiweyo.Isetyenziswa kwihlabathi liphela eYurophu naseMelika.Ukuyifaka kunye nokuyisebenzisa ngokuchanekileyo akuyi kubachaphazela ubomi bamathaya.Kungenjalo, amatayara ngokwawo ayinto enokutyiwa, kukho iimfuno ezithile malunga nemida yobudala kunye neekhilomitha ezihanjiweyo.Kufuneka siyijonge kwaye siyitshintshe rhoqo.

Ngaba i-studs inokudlala indima ebalulekileyo kwi-anti-skid ngexesha likaxakeka ?

Xa uqhuba kwindlela enomkhenkce, kulula ukutyibilika .amavili angakugcina ukhuselekile.Ifakwe kumphezulu werabha yesondo ngokuthe ngqo, yenza uzinzile.Phucula ukuncamathelisa, ukwenza ukuba ukuqhuba kuzinzile, kungabikho ukutyibilika.
Iingcebiso: izikhonkwane zamatayara azinamandla onke.Kukhuseleko lwakho lokuhamba, Ukuqhuba ngononophelo yeyona nto ibalulekileyo.

Unokukhetha njani izikhonkwane zamatayara?

1) .Amatayara anomngxuma, sinokukhetha i-rivet shape tayara studs okanye i-cup shape tayara studs.Amatayara ngaphandle komngxuma, sinokukhetha izikhonkwane zamatayara.
2).Sifuna ukulinganisa i-diameter yomngxuma kunye nobunzulu bamatayara (amatayara anomngxuma);ifuna ukulinganisa ubunzulu kwipateni yerabha yokunyathela kwitayara lakho (amatayara angenamngxuma), emva koko ukhethe ezona zityali zifanelekileyo zifanelekileyo kwitayara lakho.
3).ngokweedatha zokulinganisa, sinokukhetha ubungakanani be-studs ngokusekwe kumatayara akho kunye neendlela ezahlukeneyo zokuqhuba.Ukuba uqhuba kwindlela yedolophu, sinokukhetha ubungakanani obuncinci bokuvelela.Xa uqhuba kwindlela enodaka, kumhlaba onesanti kunye nendawo eshinyeneyo yekhephu yomkhenkce, sinokukhetha ubungakanani obukhulu bokuduma, ukwenza ukuqhuba kuzinze ngakumbi.

Ngaba sinokuzifakela ngokwethu izixhobo zamatayara ?

Akuyongxaki ukuzifaka wedwa izikhonkwane zamatayara.Kulula noko.Ungayifaka ngesandla okanye usebenzise izixhobo zombane ukuphucula ukusebenza kakuhle.Siza kukubonelela ngevidiyo yokufakela.

Ndingayikhulula xa ndingayifuni?

Inokususwa ngokwexesha lonyaka, kwaye inokuqhathwa xa ungasetyenziswanga kwakhona kwixesha lonyaka elilandelayo.


  • Ngaphambili:
  • Okulandelayo: